Description
Directions
Spotting board: Prepare a stock solution with 3 parts water to 1 part BIO-ZYME, then spray onto washable fabrics.
Processed items should sit damp for 30–60 minutes before washing.
Washers: Add BIO-ZYME to the break operation of wet-cleaning machines at a rate of 5–10 ounces of concentrate
per 50-pound machine capacity (1–2 ounces per 10 pounds of garments). Water temperatures can range from 60–
110ºF, and hold times will vary depending on the degree of soil contamination.
Carpet spotter: Remove excess waste. Test for colorfastness in an inconspicuous area. Mix 1 part product with 2
parts water and clean the area (use the mixed solution within 2–4 hours). For severe spots, use undiluted. Repeat the
procedure as necessary for persistent problems.
Handling
Though non-toxic, avoid breathing product mist. Avoid contact with eyes and open wounds. Wash hands after
handling. In case of contact, immediately flush your eyes with plenty of water. If ingested, drink water to dilute, and
call a physician.
Note: Do not use BIO-ZYME with disinfectants, acids, caustics, chlorinated and oxygen bleaches, or boiling water.
The product is non-corrosive. Follow standard precautions for handling chemicals when using BIO-ZYME.
Packaging
BIO-ZYME is available in 4×1-gallon cases, 5-gallon pails, and 15-gallon drums.
Reviews
There are no reviews yet.