Most owners who call us about a new BÖWE machine already know they want German build quality. The harder question is which BÖWE. Premium Line, I-Line or Indu-Line, PERC or multi-solvent, small or large: the right answer depends far more on your plant than on the brochure.
This guide walks through how the BÖWE range is organised, what actually separates the lines, and the questions we ask every customer before we recommend a model. If you would rather talk it through, our team is happy to look at your volumes with you.
How the BÖWE range is organised
BÖWE builds closed-loop dry cleaning machines in several families. The models we supply in Canada fall into three groups:
Premium Line
The workhorse for retail stores and mid-size plants. Available as multi-solvent machines (M12, M15, M18, M21, M26, M30) and as PERC machines such as the P 30 and the P Black Forest Edition.
I-Line
Larger, higher-throughput machines with more automation, offered as multi-solvent (Mi 240, 300, 360) and PERC (Pi 240, 300, 360) versions.
Indu-Line
Industrial machines such as the SI 70 and M 70, built for central plants, workwear and high daily volumes.
Within each family the model number steps up with capacity, so the real decision is usually two things: which solvent you want to run, and how many kilograms you need to process in a day.
Step 1: Decide on your solvent first
This is the choice that shapes everything else. A multi-solvent BÖWE (the “M” models) is built to run alternative solvents such as hydrocarbon, and the range includes options for newer solvents too. A PERC BÖWE (the “P” models) is designed specifically for perchloroethylene.
If you are opening a new store, replacing a PERC machine near the end of its life, or simply want flexibility for the future, a multi-solvent machine is usually the safer long-term bet. If your plant is built around PERC and your staff know it well, a modern PERC machine still makes sense, as long as you are ready for the compliance side. In Canada, PERC machines must meet the design requirements of the federal Tetrachloroethylene (Use in Dry Cleaning and Reporting Requirements) Regulations, and the facility needs proper secondary containment and record keeping.
Not sure which solvent fits your work? Our solvent comparison guide covers PERC, hydrocarbon, GreenEarth and Sensene side by side.
Step 2: Size the machine to your real volume
Buying too small is the most common mistake we see. Owners size for today’s volume, then spend the next five years running extra loads at night. Buying too large is the second most common, and it means half-empty loads and wasted solvent and energy.
Here is the rough way we work it out with customers:
- Count pounds or kilograms, not pieces. A suit, a winter coat and a silk blouse weigh very different amounts. Weigh a typical day’s work for a week.
- Look at your busiest day, not your average. Saturdays, holidays and the wedding season decide whether a machine keeps up.
- Allow for growth. If you plan to add a route, a second drop store or commercial accounts, size for that.
- Factor in cycle time. Alternative solvents usually need longer drying than PERC, so the same load size can mean fewer loads per hour.
Retail stores and small plants usually land in the Premium Line. Busier plants with several drop stores often look at the larger Premium Line models or the I-Line. Central plants and industrial work go to the Indu-Line.
Step 3: Think about your space and utilities
A new machine has to fit the room, the door and the utilities. Before we quote, we check:
- Floor space, ceiling height and how the machine will get into the building
- Electrical supply and voltage
- Steam or electric heating, compressed air and cooling water
- Where the secondary containment tray and any waste water treatment will sit
- Ventilation, especially for combustible alternative solvents
It is much cheaper to plan these things before the machine arrives than to fix them after.
Step 4: Service and parts matter as much as the machine
A BÖWE is built to last for many years, but only if it is maintained. When you compare quotes, ask who will install the machine, who will service it, how quickly parts are available, and whether technicians know the specific model. A machine that sits idle for a week waiting for a part costs far more than any difference in purchase price.
As an authorized BÖWE distributor in Canada, Extox installs, services and supports the machines we sell, and we stock solvents, filters and parts for them.
Quick comparison
| If you… | Look at |
|---|---|
| Run a single retail store and want flexibility on solvent | Premium Line multi-solvent (M series) |
| Run PERC today and want a modern PERC replacement | Premium Line PERC (P 30, P Black Forest Edition) |
| Process high volumes for several drop stores | Larger Premium Line or I-Line (Mi / Pi) |
| Run a central plant or industrial work | Indu-Line (SI 70, M 70) |
Frequently asked questions
Can a multi-solvent BÖWE run PERC?
Multi-solvent and PERC machines are engineered differently. If you want to run PERC, choose a PERC model. If you want to move away from PERC, choose a multi-solvent model. We can explain the options for your plant.
How long does installation take?
It depends on site preparation. When utilities, containment and access are ready, installation and start-up are usually quick. Planning ahead is what keeps downtime short.
Do you take trade-ins?
Talk to us about your current machine. We can advise on removal and on handling any remaining PERC waste correctly through our PERC waste management service.
Not sure which BÖWE is right for you?
Send us your weekly volume, solvent and space details. We will recommend a model and send a quote, usually within one business day.

